Βραχίονες

Βραχίονας ευθύγραμμου τύπου

Βραχίονας ευθύγραμμου τύπου

Μινιμαλιστικός σχεδιασμός, μεγαλοπρεπής σε ήχο !!!

Βραχίονας παράλληλης μετατόπισης για το Clearaudio master innovation.

Βραχίονας παράλληλης μετατόπισης. έρχεται με καλώδιο clearaudio silverwire

10" precision tonearm with carbon-fibre armtube The tonearm’s design efficiently leads parasitic vibrations away from the cartridge into the mounting board, guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical and horizontal tracing Features The headshell and armtube are fashioned from a single piece of carbon-fibre. Conical armtube avoids standing wave reflections Inverted bearing design with four ABEC7 spec ballraces. Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances. Sorbothane® -damped counterweight effectively counteracts unwanted resonances. Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records. Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. Straight armtube reduces toe-in error. Silicone-damped armlift can be adjusted to suit arm height. The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets. Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw.

Βραχίονας παράλληλης μετατόπισης για το Clearaudio master innovation.

Βραχίονας παράλληλης μετατόπισης.

Signature tonearms: Beautiful pieces of design and mechanics The Pro-Jects tonearm philosophy normally uses stiff, one piece, mid to light weight designs with Cardan pin point bearing. This tonearms perform best with all MM cartridges and MC cartridges with middle compliance. They are responsible for our famous lively, fast and dynamic sound, even in lower price ranges. A unique counterweight construction allows you to balance cartridges from 5 up to 25 grams (excluding headshell) depending on weight of the chosen headshell (up to 37 grams with ´Alu´, up to 39 grams with ´Carbon´, up to 41 grams with ´Wood´). So, this is also an ideal tonearm for direct mounting of SPU cartridges. Features Single pivot design with minimised bearing friction Non magnetic low resonance construction Fits low to high cartridge mass, including 32gr. SPU High rigidity aluminium headshell (12gr) with built-in fingerlift included, allows 1/2 inch cartridge mount High conductivity OFC headshell cables included Azimuth adjustment with screw on side Built-in 5-pin DIN connector (tonearm cable not included) High gloss finish Measure it, Alignment + Mounting distance tools included Delivered in exclusive wooden jewel box Optional headshells available: Wood (8gr) & Carbon (10gr)